Hitachi CP-X265 User's Manual And Operating Manual page 51

NETWORK Menu (continued)
Item
DEFAULT
GATEWAY
TIME
DIFFERENCE
DATE AND TIME
e-SHOT
Input the DEFAULT GATEWAY :
Use the ▲/▼/◄/► buttons to enter the DEFAULT
GATEWAY (a node on a computer network that serves
as an access point to another network) address.
This function is available as long as DHCP is set to "TURN OFF".
Input the TIME DIFFERENCE :
Use the ▲/▼ buttons to enter the TIME
DIFFERENCE.
Set the same TIME DIFFERENCE as that on your
PC. If unsure, ask your network administrator.
Use the ◄ button to return to the menu
after setting the TIME DIFFERENCE.
Input DATE AND TIME :
Use the ▲/▼/◄/► buttons to enter the Year (last two digits),
Month, Date, Hour and Minute.
~Note~
The projector will override this setting and retrieve DATE AND TIME
information from the Timeserver when SNTP is enabled. See [Date/
Time Settings] in [User's Manual - Network Functions: Configuring
and Controlling the Projector via a Web Browser] for SNTP settings.
e-SHOT display :
Use the ▲/▼ buttons to select an item and the ► or ENTER
buttons to display the image.
Image
Image
Image3
Image4
File names of registered images are
displayed by 6 characters or less.
Example: DEMONSTRATION-0
"NEW" stamp is added to the head of line when
the image is registered newly. After the image
is displayed, "NEW" stamp will be erased.
Once an image is displayed, you can use the
▲/▼ buttons to page through the images. Use
the ◄ or ESC buttons to return to the menu.
Pressing the RESET button on the remote control while an image is
being displayed will display the RESET menu. The displayed image
can be deleted from the RESET menu using the ENTER button on
the remote control or the INPUT button on the projector.
If you do not wish to delete the image use the ESC button on the remote
control or push the ◄ and INPUT buttons on the projector at the same time.
~Note~
• Items with no image stored cannot be selected.
• Images can be changed using the ▲/▼ buttons while the image data downloads.
Operation
e‑SHOT
RESET : IMAGE‑1
, +
ESC
NETWORK Menu
0. 0. 0. 0
DEFAULT GATEWAY
IMAGE‑1
:NO , :YES
ENTER
5