Hitachi CP-X265 User's Manual And Operating Manual page 39

SCREEN Menu (continued)
Item
MESSAGE
SOURCE NAME
Using the buttons ▲/▼ turns on/off the message function.
TURN ON ó TURN OFF
When the TURN ON is selected, the following message function works.
"AUTO IN PROGRESS" while automatically adjusting
"NO INPUT IS DETECTED"
"SYNC IS OUT OF RANGE"
"Searching...." while searching for the input
"Detecting...." while an input signal is detected
The indication of the input signal displayed by changing
The indication of the aspect ration displayed by changing
The indication of the My Memory displayed by changing
The indication of the Picture Mode displayed by changing
The indication of "FREEZE" and "II" while freezing the screen by
pressing the FREEZE button.
• When the TURN OFF is selected, please remember if the picture
is freezing. Do not mistake freezing for a malfunction (22).
Each input port for this projector can have a name applied to it.
(1) Use the ▲/▼ buttons on the SCREEN
menu to select SOURCE NAME and press
the ► button. The SOURCE NAME menu
will be displayed.
(2) Use the ▲/▼ buttons on the SOURCE
NAME menu to select the port to be named
and press the ► button. The SOURCE
NAME dialog will be displayed.
(3) The current name will be displayed
on the first line. Use the ◄/►/▲/▼ and
ENTER or INPUT buttons to select and
enter characters. The RESET button can
be used to erase  character at a time. The
name can be a maximum of 6 characters.
(4) To change an already inserted character,
press the ▲ button while the cursor is on the
[A-N] row to move the cursor to the name
displayed on the first line and use the ◄/►
buttons to select character to be changed.
Once a character in the name is selected
use the ▼ button to move the cursor back
down to the character entry area to select
and enter characters as described above.
(5) Select and press the ENTER or
INPUT buttons when finished entering text.
To revert to the previous name without
saving changes press the ESC or ◄ button
and the INPUT button simultaneously.
Description
*Right side of the menu is blank
until a name is specified
SCREEN Menu
SOURCE NAME MENU
39