Hitachi CP-X265 User's Manual And Operating Manual page 101

Command Control Settings (Continued)
When the authentication setting is enabled, the following settings are required.
(20)
) Click [Security Settings] on the main menu.
) Click [Network Control] and enter the desired authentication password. * See
Note.
9) Click the [Apply] button to save the settings. * See Note.
NOTE1
• The Authentication Password will be the same for [Network Control
Port1 (Port: 23)], [Network Control Port2 (Port: 9715)], and [Image Transfer
Port (Port: 9716)].
NOTE2
• The new configuration settings are activated after restarting the
network. Restart the network when any configuration settings are changed.
The network connection can be restarted using [Network Restart] on the main
menu.
Command Control via the Network
35