Programming The Clock; 2 Way Remote Button Functions; Buttons And Functions - Firstech Compustar 2W901R-SS User Manual

!
Quick Reference !

Programming the Clock

STEP 1: Enter remote programming mode by holding the Trunk and Start/Stop buttons
"REMOTE MENU" to indicate that you have successfully entered programming mode.
STEP 2: After entering programming mode the time icon will flash indicating the current time. Adjust the time settings by tapping the Lock
change the hour and Unlock button to adjust the minute
STEP 3: Once the time has been set, exit remote programming by holding down the Trunk and Start/Stop
remote will beep indicating that you have successfully exited programming mode.
!
By Firstech, LLC 8
2W901R-SS_ES USER GUIDE.indd 9-10
!
for 2.5 seconds. The remote will beep and the LCD read
buttons for 2.5 seconds. The
!
!
!
!
Quick Reference

2 Way Remote Button Functions

Button Duration LCD readout
button to
half second LOCK ARM
4 seconds PANIC
half second UNLOCK DISARM
half second
double tap REMOTE VOLTAGE Tapping this button twice will show the remote's battery voltage.
2.5 seconds TRUNK OPEN
TEMPERATURE/
half second
VEHICLE VOLTAGE
double tap EXTEND
2.5 seconds REMOTE START
This button activates and deactivates multiple features. See the Function Button Menu table below for complete details.
Function/Description
Locks doors and if equipped, arms the alarm.
Panic/vehicle locater (flashes vehicle's parking lights and sounds siren and horn).
Unlocks doors and if equipped, disarms the alarm.
Turns on the CompuGLO backlight
Trunk release. Triggers the trunk release output and opens the vehicle's trunk.
Car Check (updates vehicle status on remote pager) / Secure Auxiliary /
Temperature Display / Vehicle Voltage Display
Run time extender. Resets the run time for Turbo Timer or Remote Start.
Holding this button will start your vehicle. Repeat and this will shut your vehicle down.
9 By Firstech, LLC
2011-3-26 14:33:56