Advanced System Functions; Drive Lock / Lgnition Controlled Door Locks; Nd Car Mode (Multiple Vehicle Control); Turbo Timer Mode - Firstech Compustar 2W901R-SS User Manual

Advanced System Functions

The following section reviews advanced system functions. Many of these functions require multiple steps or additional programming by your local
authorized Firstech dealer to be active.

Drive Lock / lgnition Controlled Door Locks

Tap the Function button once followed by the Lock button
door locks) The remote will beep once, "DRIVE LOCK ON" will scroll across the screen, and the
drive lock mode is activated. The remote will beep twice, "DRIVE LOCK OFF" will scroll across the screen, and the drive lock icon will
disappear to confirm drive lock is off.
IMPORTANT: Drive lock mode requires the dealer turn on Option 1-9. Drive lock has two settings;
Default 1: Off !
Option 2: Locks the doors when the ignition is on and after the brake is depressed.
Option 3: locks the doors when the RPM's have reached two times that of idle speed (this setting requires that a tachometer wire is connected).
With both settings, the doors will unlock when the ignition is turned off. If using this feature on a manual transmission vehicle, the doors will unlock
upon setting the emergency / parking brake.
nd
2 Car Mode (Mulitiple Vehicle Control)
Most 2 Way remotes have the ability to operate a 2nd vehicle. Tap the Function
2
this feature. The remote will beep once, " ND CAR ON" will scroll across the screen, and the 2nd car icon will illuminate to confirm
!
that 2nd car mode is activated. The remote will beep twice, "
confirm 2nd car mode is off.
IMPORTANT: 2nd car mode requires the remote to be programmed to a 2nd vehicle that is equipped with the same system.
By Firstech, LLC 28
2W901R-SS_ES USER GUIDE.indd 29-30
to turn the Drive Lock on and off. (also known as ignition controlled
icon will illuminate to confirm that
!
button twice then tap the Lock button
2
ND CAR OFF" will scroll across the screen, and the icon will disappear to
!
Advanced System Functions

Turbo Timer Mode

The built in turbo timer keeps the vehicle's engine running for either 1, 2, or 4 minutes (programmable from dealer) after the vehicle key
!
has been removed from the ignition. This feature will keep oil running through the turbo system to allow for appropriate cooling time.
Tap the Function button
TIMER ON" will scroll across the screen, and the turbo icon inside the motor icon will illuminate to confirm that turbo mode is activated.
Repeat to turn turbo timer off. The remote will beep twice, "TURBO TIMER OFF" will scroll across the screen, and icon will disappear to confirm
turbo mode is off.
IMPORTANT: To utilize this feature, the emergency / parking brake wire must be connected to the Firstech system. Consult your local authorized
!
dealer for installation.
RPS Touch and RPS (Remote Paging Sensor)
The RPS is an optional feature. The car call/RPS feature uses a small sensor that is mounted on the inside of your windshield.
to activate
once followed by the Unlock button to turn turbo mode on or off. The remote will beep once, "TURBO
!
29 By Firstech, LLC
2011-3-26 14:34:17