Canon LV-7297M User Manual page 50

VIDEO Input
Keystone
This function is used to adjust keystone
distortion of the projected image. Use the Point
▲▼ buttons to choose the item you want to
adjust.
Keystone
To correct keystone distortion, press the OK
button.
Keystone appears on the screen. Use the
Point ▲▼ buttons to correct keystone
distortion (p. 26).
Store
To store or reset the keystone correction,
press the Point ► button.
Store .......... Keep the keystone correction
even when the AC power cord
is plugged out or turned off the
projector.
Reset .......... Release the keystone correction
when the AC power cord is
plugged out.
Ceiling
When this function is set to On, the picture
will be top/bottom and left/right reversed. This
function is used to project the image from a
ceiling-mounted projector.
Rear
When this function is set to On, the picture will
be left/right reversed. This function is used to
project the image from rear of the screen.
Screen aspect
This function is used to project the image to a 4:3
or 16:9 projection screen.
Default (16:10) .... 16:10 is the aspect of the
16:9 ......................Set to a 16:9 projection screen.
4:3 ........................Set to a 4:3 projection screen.
Reset
To reset the adjusted data, select Reset and
press the OK button. A confirmation box appears
and then select "Yes". All adjustments will return
to their previous figures.
Note:
• When the 16:9 function is selected on Screen
aspect menu, 16:9 is not available in the PC and
AV screen (pp.39, 49).
• When the 4:3 function is selected on Screen
aspect menu, Natural wide is not available in the
AV screen (p.49).
50
LCD panel. The original
Screen Menu is available.
Keystone
Press the OK button.
Ceiling
Rear