1. Manuals
  2. Brands
  3. Canon Manuals
  4. Projector
  5. LV-8225
  6. User manual

Canon LV-8225 User Manual

Canon lv-8225: user guide
Hide thumbs Also See for LV-8225:
Table of Contents

Advertisement

Quick Links

Download this manual
MULTIMEDIA PROJECTOR
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Canon LV-8225

Summary of Contents for Canon LV-8225

  • Page 1 MULTIMEDIA PROJECTOR User’s Manual...

  • Page 2: Features And Design

    This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ♦ Compact Design This projector is designed compact in size and weight.

  • Page 3: Table Of Contents

    Appendix . . . . . . . . . . . . . . . . . . . . . . . 70 Troubleshooting Menu Tree Indicators and Projector Condition Compatible Computer Specifications Technical Specifications Optional Parts PJ Link Notice Attaching the Filter Cover to the Projector 79 Configurations of Terminals PIN Code Protection Dimensions...

  • Page 4: To The Owner

    The dimension shown here indicate the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained. SIDE and TOP 0.7’(20cm)

  • Page 5: Safety Instructions

    When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following the operating instructions.
  • Page 6 – Do not attempt to disassemble the projector (including expendable parts) or remote control unit. – Do not look into the lens while the projector is used. Strong light may hurt your eyes. Be especially careful that small children do not look into the lens.
  • Page 7 – Directly touching the lens may cause poor image quality. – If the projector is carried from a cold place to a warm place or the room temperature is raised rapidly, condensation may form on the lens and mirror due to the moisture in the atmosphere, resulting in a blurred picture.

  • Page 8: Air Circulation

    This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer. – Do not put the projector in a case before the projector is cooled enough.

  • Page 9: Compliance

    This Class B digital apparatus complies with Canadian ICES-003. AC POWER CORD REQUIREMENT The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada: AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).

  • Page 10: Part Names And Functions

    ⑤ Infrared Remote Receiver ⑥ Projection Lens ⑦ Lens Cap (See page 67 for attaching.) CAUTION Do not turn on a projector with lens cap attached. High temperature from light beam may damage lens cap and result in fire hazard. ⑧ ⑧ Air Intake Vent ⑨ Lamp Cover ⑩...

  • Page 11: Rear Terminal

    ① ① CONTROL PORT When the projector is controlled by a computer, connect to this jack with serial control cable. ② COMPUTER IN 1 /S-VIDEO IN / COMPONENT IN Connect output signal from a computer, component video output, RGB scart 1- pin video output or S-VIDEO output to this terminal (pp.17-19).

  • Page 12: Top Control

    Top Control POWER WARNING LAMP REPLACE MENU ⑤ POWER indicator – Lights red when the projector is in stand-by mode. – Lights green during operations. – Blinks green in the Power management mode (p.56). ⑥ MENU button Open or close the On-Screen Menu (p.4).

  • Page 13: Remote Control Unit

    ⑧ ⑨ ⑩ ⑪ ⑫ ① POWER button Turn the projector on or off. (pp.1-3) ② AUTO SET button Execute the setting of Auto setup (includes Auto input, Auto PC and Auto Keystone functions) in the setting menu. (pp.6, 5) Note: To ensure safe operation, please observe the following precautions: –...

  • Page 14: Remote Control Unit Battery Installation

    (Infrared Remote Receiver) when pressing the buttons. Maximum operating range for the remote control unit is about 16.4'(5 m) and 60 degrees in front of the projector. The  different remote control codes (Code 1–Code ) are assigned to this projector. Switching the remote...

  • Page 15: Installation

    For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. Note: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.

  • Page 16: Adjustable Foot

    Adjustable Foot Projection angle can be adjusted up to 10.0 degrees with the adjustable foot. Lift the front of the projector and push the foot lock latch on the projector. Release the foot lock latch to lock the adjustable foot and rotate the adjustable foot to adjust the position and tilt.

  • Page 17: Connecting To A Computer

    COMPONENT IN and the COMPUTER IN /MONITOR OUT terminals as input. • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. •When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 /S-VIDEO IN/ COMPONENT IN and not the COMPUTER IN /MONITOR OUT.

  • Page 18: Connecting To Video Equipment

    Note: • When the MIC function is set to Off in the Sound menu, the MIC function is disabled. • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • See page 78 for ordering optional cables.

  • Page 19: Connecting To Component Video And Scart Equipment

    COMPONENT IN Note: • When using MIC function, see pages 17-18 for detail about connection. • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • See page 78 for ordering optional cables. COMPONENT VIDEO Output...

  • Page 20: Using The Ferrite Core 0

    Note: Unplug the AC power cord when the projector is not in use. When this projector is connected to an outlet with the AC power cord, it is in Stand-by mode and consumes a little electric power.

  • Page 21: Basic Operation

    And then follow the input signal guidance window to correct the signal and connection. If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed on the next page.
  • Page 22 •The “134” is set as the initial PIN code at the factory. CAUTION ON HANDLING PIN CODE If you forget your PIN code, the projector can no longer be started. Take special care in setting a new PIN code. Write down the number as a reminder. Should the PIN code be missing or forgotten, consult your dealer or service center.

  • Page 23: Turning Off The Projector 3

    • The running speed of cooling fans is changed according to the temperature inside the projector. • Do not put the projector in a case before the projector is cooled enough. • If the WARNING indicator blinks or lights red, see “WARNING indicator” on page 65.

  • Page 24: How To Operate The On-Screen Menu 4

    Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual.

  • Page 25: Main Menu 5

    Custom adj., Keystone, Ceiling, Rear, Screen aspect and Reset]. (pp.49-50) ⑥ Sound Used to adjust the volume or mute the sound or set configurations to the MIC functions (p.7). ⑦ Setting Used to set the projector’s operating configurations. (pp.51-63) ⑧ Information Display the input source information. (p.64) ⑨ Network See user’s manual of “Network Set-up and Operation”.

  • Page 26: Zoom And Focus Adjustment 6

    Basic Operation Rotate the Zoom Ring to zoom in and out. Rotate the Focus Ring to adjust the focus of the image. Auto setup function is provided to automatically execute the setting of Auto setup (includes Auto input, Auto PC and Auto Keystone functions) in the setting menu by just pressing the AUTO SET button on the top control or the remote control unit.

  • Page 27: Sound Adjustment 7

    Direct Operation Volume Press the VOLUME+/– buttons on the top control or on the remote control unit to adjust the volume. The volume dialog box appears on the screen for a few seconds. Mute Press the MUTE button on the remote control unit to select On to temporarily turn off the sound.

  • Page 28: Remote Control Unit Operation 8

    Basic Operation Using the remote control unit for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. COMPUTER 1/2, VIDEO, S-VIDEO and COMPONENT buttons Press the COMPUTER 1/, VIDEO, S-VIDEO and COMPONENT buttons on the remote control unit to select the input source.
  • Page 29 BLANK button Press the BLANK button on the remote control unit to black out the image. To restore to normal, press the BLANK button again or press any button. When the projected image is captured and is set as User in the Logo selection (p.

  • Page 30: Computer Input

    Input Source Selection (ANALOG PC: COMPUTER 1/COMPUTER 2) Direct Operation Choose either COMPUTER 1 (ANALOG PC) or COMPUTER 2 (ANALOG PC) by pressing the COMPUTER 1 or COMPUTER  button on the remote control unit. Before using these buttons, correct input source should be selected through Menu operation as described below. Remote control unit Menu Operation Press the MENU button to display the On-Screen Menu.

  • Page 31: Computer System Selection

    This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on page 76.)

  • Page 32: Auto Pc Adjustment

    OK button. To store adjustment parameters The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1–10) in the PC System Menu (p.31).

  • Page 33: Manual Pc Adjustment

    Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.
  • Page 34 Note:  • Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the PC System Menu (p.31). • When input computer signal to the projector, PC adjust will become available. Mode free This Mode has stored parameters. Values of Total dots, Horizontal position, Vertical position, Display area H, and Display area V.

  • Page 35: Image Mode Selection

    Use the Point ▲▼ buttons to select the desired item and then press the OK button. Presentation For viewing pictures in a bright room. Standard Normal picture mode preset on the projector. High contrast Picture mode with improved halftone for graphics. Cinema Picture mode adjusted with fine tone.

  • Page 36: Image Adjustment

    Computer Input Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the OK button. Use the Point ▲▼ buttons to select the desired item and then press the OK button to display the adjustment dialog box.

  • Page 37: Aspect Setting

    Aspect Setting This projector has the picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Aspect and then press the Point ► or the OK button.
  • Page 38 When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be left/right reversed.

  • Page 39: Aspect Setting (For Lv-85)

    This projector has the picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Screen and then press the Point ► or the OK button.
  • Page 40 When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be left/right reversed.

  • Page 41: Video Input

    Input Source Selection (VIDEO, S-VIDEO) Direct Operation Choose VIDEO or S-VIDEO by pressing the VIDEO or the S-VIDEO button on the remote control unit. Before using these buttons, correct input source should be selected through menu operation as described below. Menu Operation Press the MENU button to display the On- Screen Menu.

  • Page 42: Input Source Selection (Component, Scart)

    VIDEO Input Input Source Selection (COMPONENT, SCART) Direct Operation Choose COMPUTER 1(COMPONENT) or COMPUTER 1 (SCART) by pressing the COMPONENT or the COMPUTER 1 button on the remote control unit. Before using these buttons, correct input source should be selected through Menu operation as described below. Remote control unit Menu Operation Press the MENU button to display the On-Screen Menu.

  • Page 43: Video System Selection

    When VIDEO System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M and PAL-N. COMPONENT...

  • Page 44: Image Mode Selection

    Use the Point ▲▼ buttons to select the desired item and then press the OK button. Presentation For viewing pictures in a bright room. Standard Normal picture mode preset on the projector. High contrast Picture mode with improved halftone for graphics. Cinema Picture mode adjusted with fine tone.

  • Page 45: Image Adjustment

    Press the MENU button to display the On- Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the OK button. Use the Point ▲▼ buttons select the desired item and then press the OK button to display the adjustment dialog box.
  • Page 46 L 1 ... For an active picture. L 2 ... For a still picture. Film ... For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the OK button.

  • Page 47: Aspect Setting

    Aspect Setting This projector has the picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On- Screen Menu. Use the Point ▲▼ buttons to select Aspect and then press the Point ► or the OK button.
  • Page 48 When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be left/right reversed.

  • Page 49: Aspect Setting (For Lv-85)

    This projector has the picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On- Screen Menu. Use the Point ▲▼ buttons to select Aspect and then press the Point ► or the OK button.
  • Page 50 When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be left/right reversed.

  • Page 51: Setting

    This projector has a Setting menu that allows you to set up the other various functions described below. Press the MENU button to display the On- Screen Menu. Press the Point ▲▼ buttons to select Setting and press the Point ► or the OK button to access the submenu items.
  • Page 52 On 2... Auto input works under the following situation. – When turning on the projector by pressing the POWER button on the top control or the remote control unit. – When pressing the AUTO SET button on the remote control unit or the top control.
  • Page 53 Countdown Off... Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.
  • Page 54 User. Then the captured image will be displayed the next time you turn on the projector or when you press the BLANK button (p 9). To cancel the capture function, select Yes in the "Quit?"...
  • Page 55 Key lock will be reset, as well. 1. Unplug the AC Power Cord from the AC outlet. . Hold down the OK button on the projector and connect the AC Power Cord into the outlet again. Keep holding down the OK button until the POWER indicator lights.
  • Page 56 (1~30min). Note: Factory default is Standby: 5 min. Direct power on When this function is set to On, the projector will be automatically turned on just by connecting the AC power cord to a wall outlet. Note: • Be sure to turn off the projector properly (see “Turning Off the Projector”...
  • Page 57 Eco ... Select Eco when you do not use the projector via network. The projector’s network function will stop when turning off the projector, you can not turn on the projector via network. Refer to the user’s manual of “Network Set-up and Operation”.
  • Page 58 Setting Closed Caption Closed Caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels. Press the Point ▲▼ buttons to select buttons to select Off, CC1, CC2, CC3 or CC4.
  • Page 59 When operating the projector in Code 2, both the projector and the remote control unit must be switched to Code 2. To change the code for the projector: Select either Code 1 or Code 2 in this Setting Menu.
  • Page 60 Setting Security (Key lock and PIN code lock) This function allows you to use the Key lock and PIN code lock function to set the security for the projector operation. Key lock This function locks the top control and remote control unit buttons to prevent operation by unauthorized persons.
  • Page 61 Key lock will be reset, as well. 1. Unplug the AC Power Cord from the AC outlet. . Hold down the OK button on the projector and connect the AC Power Cord into the outlet again. Keep holding down the OK button until the POWER indicator lights.
  • Page 62 Setting This function provides the following options in the cooling fans’ operation when the projector is turned off (p.3). L 1 ... Normal operation L 2 ... Slower, lower-sound and longish-time than the normal operation (L 1). Fan control Choose the running speed of cooling fans from the following options according to the ground elevation under which you use the projector.
  • Page 63 Freeze (p.8), or Blank (p.9). Warning log This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order.

  • Page 64: Information

    The selected Key lock icon is displayed. PIN code lock Off or On 1 or On 2 is displayed. Remote control The selected remote code is displayed. SERIAL NO. The serial number of the projector is displayed. The serial number is used to service the projector. Information Input Source Information Display Remote control unit Information Menu...

  • Page 65: Maintenance And Cleaning

    Maintenance and Cleaning The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. The projector is shut down and the WARNING indicator is blinking red. When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector.

  • Page 66: Replacing The Filter

    If a “Filter warning” icon appears on the screen, replace the Filter immediately. Replace the filter by following the steps below.

  • Page 67: Attaching The Lens Cap

    Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the cabinet. When the projector is not in use, put the projector in an appropriate carrying case to protect it from dust and scratches. CAUTION Do not use any flammable solvents or air sprays on the projector and in its vicinity.

  • Page 68: Lamp Replacement

    When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp may be broken. If replacing the lamp of a projector which has been installed on the ceiling, you should always assume that the lamp is broken, and you should stand to the side of the lamp cover, not underneath it. Remove the lamp cover gently.
  • Page 69 ● If the projector indicates that the lamp should be replaced, i.e., if the �AMP If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.

  • Page 70: Appendix

    – Make sure you have properly connected the projector to peripheral equipment as described on pages 17-19. – Make sure all equipment is connected to AC outlet and the power is turned on. – When the projector does not project an image from the connected computer, restart the computer. Problem: No power The initial display is not shown. –...
  • Page 71 – Press the Volume + button. See page 7. – Press the Mute button. See page 7. – When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. – Is the image projected? You will hear the Computer and VIDEO sound only when the image is projected.
  • Page 72 High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service. – Check PC adjust menu or Screen menu and adjust them.

  • Page 73: Menu Tree

    Timer Start/Stop/Restart Reset Exit Closed Caption Off/CC1/CC/CC3/CC4 Color Color/White High/Normal/Eco Code 1–Code  Key lock Projector Remote control PIN code lock Off/On 1/On  PIN code change L 1/L  Off/On 1/On  Off/On Lamp counter Lamp counter reset Yes/No...
  • Page 74 Noise reduction Progressive Reset Store For LV-7290, LV-7295, LV-7390 Aspect Normal Full 16:9 Zoom Custom Custom adj. Keystone Ceiling Rear Reset For LV-8225 Aspect Normal Full 16:9 Zoom Natural wide Custom Custom adj. Keystone Ceiling Rear Screen aspect Reset Auto SECAM * Systems displayed in the System Menu vary depending on an input signal.

  • Page 75: Indicators And Projector Condition

    The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup.

  • Page 76: Compatible Computer Specifications

    Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. ON-SCREEN RESOLUTION DISPLAY VGA 1...

  • Page 77: Technical Specifications

    Technical Specifications Mechanical Information Projector Type Dimensions (W x H x D) Net Weight Foot Adjustment Panel Resolution LCD Panel System Panel Resolution Number of Pixels Signal Compatibility Color System SD/HD TV Signal Input Scanning Frequency Optical Information Projection Image Size (Diagonal) Throw Distance Projection Lens...

  • Page 78: Optional Parts

    LCD panels. The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer. COMPONENT-VGA Cable S-VIDEO-VGA Cable Soft Carrying Case Remote controller Projector Attachment Ceiling Attachment High Ceiling Attachment Optional Parts Model No. : LV-CA3 : LV-CA33 : LV-SC01...

  • Page 79: Pj Link Notice

    This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see the user’s manual of “Network Set-up and Operation.”...

  • Page 80: Configurations Of Terminals

    Appendix COMPUTER IN 1 / S-VIDEO IN/ COMPONENT IN Terminal: Analog RGB (Mini D-sub 15 pin) COMPUTER IN 2/MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) CONTROL PORT CONNECTOR (D-sub 9 pin) LAN TERMINAL Configurations of Terminals Red/Cr/S-C Input Green/Y/S-Y Input Blue/Cb/--- Input ----- Ground (Horiz.sync.) Ground (Red) Ground (Green) Ground (Blue) Red Input/Output Green Input/Output Blue Input/Output ----- Ground (Horiz.sync.) Ground (Red) Ground (Green) Ground (Blue) Serial ----- R X D T X D -----...

  • Page 81: Pin Code Protection

    Appendix PIN Code Protection While the projector is locked with the PIN code. Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code.

  • Page 82: Dimensions

    Appendix 247.0(9.72) 138.0(5.43) 4.6(0.18) 122.2(4.81) 114.0(4.49) 80.2(3.16) 46.2(1.82) 79.6(3.13) 85.4(3.36) 83.8(3.30) Dimensions Screw Holes for Ceiling Mount Screw: M4 Depth: 1.0(0.47) 2.9(0.11) 20.7(0.92) 40.7(1.60) 88.7(3.49) 31.7(1.25) 64.6(2.54) Unit: mm(inch) 105.6(4.16) 24.0(0.94) 98.1(3.86) 122.3(4.48) 126.3(4.97)
  • Page 83 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC.

This manual is also suitable for:

Lv-7290Lv-7295Lv-7390

Table of Contents