Listening To The Radio - Emerson Research CKS1701 Owner's Manual

Listening To The Radio

1.) Set the BAND selector to the desired band, AM or FM.
2.) Set the VOLUME control to a low setting.
3.) Switch the OFF-ON-BUZZ-AUTO selector switch to the "ON" position.
4.) Select your desired station with the TUNING control.
5.) Adjust the VOLUME control to the desired setting.
6.) When you are finished listening, Switch the OFF-ON-BUZZ-AUTO selector
switch to the "OFF" position.
Antenna Information
AM – The AM bar antenna is inside the cabinet. If AM reception is weak, change
the position of cabinet until the internal antenna picks up the strongest signal.
FM
– The FM antenna is built in to the AC power cord. If FM reception is weak try
varying the position and direction of the power cord until you find the strongest
signal.
CKS1701_032306.p65
12
12 23/3/2006, 14:44