Date Display - Emerson Research CKS1701 Owner's Manual

There are 7 time zones programmed into your SmartSet
To change the default time zone display, depress the TIME ZONE button.
The number "2" will appear on the display
indicating that the default zone is ZONE 2,
Eastern Time.
Hold the TIME ZONE button and then press either the SET + or – buttons until
your own time zone appears on the display, then release the buttons. The clock
display will change to the correct time in the time zone you selected. The clock will
always return to the correct time in the zone you selected after every power
interruption. If you move to a different time zone, simply change the default zone
display to the new zone and the SmartSet

Date Display

To see the correct date at any time, depress the MONTH/DATE button. The display
changes from Time to Month and Date (MM/DD).
For example, May 21
When you release the MONTH/DATE button the display returns to the correct
time.
CKS1701_032306.p65
ZONE 1 — Atlantic Time
ZONE 2 — Eastern Time
ZONE 3 — Central Time
ZONE 4 — Mountain Time
ZONE 5 — Pacific Time
ZONE 6 — Yukon Time
ZONE 7 — Hawaiian Time
®
st
will appear as "5 21".
9
9
®
clock radio as follows:
(Default Setting)
will remember that setting for you.
23/3/2006, 14:44