Listening To The Radio - Emerson CKD2300 Owner's Manual

Listening To The Radio

1.) Slide the Function selector (RADIO/CD/BUZZ) switch, located
on the right side cabinet, to the "RADIO" position.
2.) Slide the Band selector (AM/FM/FM ST.) switch, located on
the right side cabinet, to the desired band.
3.) Press the POWER button on the front panel to turn the system
' On' . The Power indicator comes ' On' .
4.) Tune to the desired station by slowly rotating the TUNING
control on the right side.
If you tune to an FM Stereo
station the FM ST. indicator
will come ' On' .
Note: If you tune to a distant FM stereo station and the
reception is noisy or weak, slide the Band selector to the
FM position. The reception will usually improve but the
sound will no longer be in stereo.
5.) Adjust the VOLUME control, located on the left side of the
cabinet, to the desired level.
6.) When you are finished listening press the POWER button on
the front panel to shut the radio ' Off' . The POWER indicator
goes ' Off' .
CKD2300_060305.p65
PM
AL 1
11
11
AL 2
3/6/2005, 11:04