Setting The Time; Dimmer Control; Listening To The Radio - Emerson CKD9918 Owner's Manual

Setting the Time

Press the POWER/ALARM OFF button to turn off
the unit, press once the CLK SET button and then
press either the
time forward or backward as desired. Press again
the CLK SET button and then either the
buttons to adjust the minute time forward or
backward as desired.

Dimmer Control

If you find the display to be too bright for sleeping, slide the DIMMER selector
switch to the LOW position. The display DIMMER selector switch is located on
the left of the side cabinet.

Listening To the Radio

Press the POWER/ALARM OFF button on the
1.)
top panel to turn the unit 'On'. The POWER LED
indicator will light.
Press the FUNCTION button repeatedly, it will
2.)
change on the function to FM radio, AM radio, CD
and Aux. To select FM Radio, press the
FUNCTION button repeatedly until the display
shows "r-F" (FM Radio), and then MHz will
appear on the display. To select AM radio, press
the FUNCTION button repeatedly until the
display shows "r-A" (AM radio), and then KHz will
now appear on the display.
3.) Press and hold the
searches. When a station is received it will stop searching. Repeat the
procedure until your desired stations are selected.
If you tune to an FM stereo station, the ST (STEREO) indicator will light.
Rotate the VOLUME control on the left side panel to adjust the volume level.
4.)
When you are finished listening press the POWER/ALARM OFF button to
5.)
turn the unit 'Off'. The POWER LED indicator turns off.
In Radio listening mode, the radio frequency display will appear for approx. 3
seconds, then the clock time will appear on the display. Press the DISPLAY
button to show the radio frequency, a few seconds later the display will show the
clock time.
or buttons to adjust the hour
or
ST ST
MHz MHz
or
buttons on the top panel to start stations
AM
9
AM
AM
FM BAND
AM BAND
MHz
KHz