Table of Contents
Advertisement
Using Your XL-25s
Outgoing Voice Volume
1. Press the OUT VOL AMPLIFY
button as shown in Figure 8 to
turn the outgoing voice amplifier
on or off.
Figure 8 - AMPLIFY Button
2. Adjust the outgoing speech
volume by moving the OUT VOL
slide control in Figure 9. The
amplification gives you up to
18+dB of sound boost. Slide
the control button to the right to
amplify your voice. Ask the
person you are calling if they
can hear you. Continue to
adjust volume until the other
party can hear you.
Note: Whether you speak loud or
soft an internal Automatic Level
Control Circuit will maintain a
normal output level with crisp,
distortion-free sound.
10
Figure 9 - Volume Slide Control
Note: In standard use of the
XL-25s, the amplifier turns off
whenever you hang up the
telephone. This is a useful feature
if many people use the phone. If
you want the amplifier to always
remain on at the most recent
volume setting, slide the switch on
the bottom of the phone, as shown
in Figure 10.
Figure 10 - Internal Amplifier
On/Off
Advertisement
Table of Contents
