Clarion VS735 User Manual page 6

The [POWER] button turns the VS735 on and off. When the
ignition switch is in the ACC or RUN positions, this button is
illuminated red. The [POWER] button on the remote can also
be used.
The IR Receiver detects the signals from the included infrared
remote control. Aim the remote control at the IR receiver
during use.
SCN REPEAT 1
DVD
TITLE
RDM
VCD
CD
L / R
MP 3
The front-panel display provides basic information about the
status of the VS735. Please note that much information about
using the VS735 will be displayed on the video screen
connected to the unit, and initial setup of the VS735 cannot be
completed without an operating video monitor providing this
on-screen display of menus and settings. Whenever the term
"on-screen display" is used, it refers to the video monitor
display, not the front panel display.
6
VS735
A - B REMAIN DOLBY
ANGLE
CHP TRK DIGITAL
PBC
Reset button
Disc loading
slot
DCP release button
(on back of DCP)
Once the face is lowered, insert discs by placing them into
the disc loading slot.
The [ ] eject button is located on the back of the detachable
control panel (DCP), not on the front panel. It is backlit green
whenever the key is in the ACC or RUN positions. It ejects
discs from the disc loading slot.
The Security LED flashes red when the Detachable Control
Panel is removed.
The Reset button can be used to reset the internal micropro-
cessor. See "Troubleshooting", in Section 10, for more
information.
Security
LED
Eject button
(on back of DCP)