Clarion VS735 User Manual page 20

Installing into the Universal In-Dash Mount Sleeve
Hole
Tabs
Screwdriver
or other tool
VS735 unit
Sleeve clip
Trim ring
20
VS735
Rear fastening hole of vehicle,
or backstrap
Instrument panel
Nut and washer
Universal mounting bracket sleeve
Tabs
Removing the VS735 from the Universal In-Dash Mount
Note:
This requires you to have the original release tools provided with the
VS735. Keep these tools in a safe place, not in the vehicle.
1 Remove the rear nut from the backstrap.
2 Remove the trim ring.
3 Insert the removal tools as shown, until a 'click' is heard.
Pull gently and evenly on both the left and right side tools,
and the unit will slide out of the mounting bracket sleeve.
Mounting bracket
sleeve
Removal tools
Trim ring
Instrument
panel
Rear nut
VS735
Sleeve clip