Error Displays; Specifications - Clarion XMD1 Owner's Manual

9.ERROR DISPLAYS

To protect the system, this unit has been equipped with self diagnostic functions. If a fault arises, a warning is issued by various error
displays. Follow the corrective measures and remove the fault.
Error Display

10. SPECIFICATIONS

FM Tuner
Frequency Range: 87.9 MHz to 107.9 MHz
Usable Sensitivity: 11 dBf
50 dB Quieting Sensitivity: 17 dBf
Alternate Channel Selectivity: 75 dB
Stereo Separation (1 kHz): 35 dB
Frequency Response ( 3 dB): 30 Hz to 15 kHz
AM Tuner
Frequency Range: 530 kHz to 1,710 kHz
Usable Sensitivity: 25 V
CD Player
System: Compact disc audio system
Usable Discs: Compact disc
Frequency Response: 10 Hz to 20 kHz ( 1 dB)
Signal-to-Noise Ratio: 100 dB (1 kHz) IHF-A
Dynamic Range: 95 dB (1 kHz)
Harmonic Distortion: 0.01% (1kHz)
Audio
Maximum Power Output:
180 W (45 W 4 ch)
Continuous Average Power Output:
16 W 4, into 4 , 20 Hz to 20 kHz,1%THD
Bass Control Action (30 Hz): 13 dB
Treble Control Action (10 kHz): 10 dB
Line Output (CD 1 kHz, 10 k ): 1.8 V
This error display indicates that a fault has arisen in the mechanism of the source unit or CD
changer (for example, the disc cannot be changed or ejected).
Check the source unit and CD changer.
This error display indicates that the pickup focus is off because of a scratched disc or some
other factor during source unit or CD changer play.
Check the compact disc.
This indicates that the CD's TOC (table of contents) cannot be read, for example because the
selected disc is upside-down.
General
Power Supply Voltage: 14.4 V DC (10.8 V to 15.6 V allowable), nega-
tive ground
Current Consumption: Less than 15 A
Speaker Impedance: 4
Weight: 5.5 lb. (2.5 kg)
Dimensions:
7" (178 mm) Width
Escutcheon section
9" (232 mm) Width
ness
Notes:
• Specifications comply with EIA Standards.
• Specifications and design are subject to change without notice for
Corrective Measure
(4
2" (50 mm) Height
4" (94 mm) Height
7" (178mm)
9" (232mm)
further improvement.
to 8 allowable)
6" (152 mm) Depth
1-1/2" (27 mm) Thick-
2" (50mm)
4" (94mm)
XMD1/XMD2
11