Enabling Atm Rmon Data Collection - Cisco Catalyst 8540 MSR Configuration Manual

Chapter 15 Configuring ATM Accounting, RMON, and SNMP
Examples
The following example shows how to display the ATM RMON host configuration for port selection
group 6 using the show atm rmon host command from user EXEC mode:
Switch# show atm rmon host 6
PortSelGrp: 6
The following example shows how to display the ATM RMON matrix configuration for port selection
group 6 using the show atm rmon matrix command from user EXEC mode:
Switch# show atm rmon matrix 6
PortSelGrp: 6
The following example shows how to display the ATM RMON statistics configuration for port selection
group 6 using the show atm rmon stats command from user EXEC mode:
Switch# show atm rmon stats 6
PortSelGrp: 6
CBR/VBR: calls: 0/0
ABR/UBR: calls: 0/0
The following example shows how to display the ATM RMON status for all port selection groups using
the show atm rmon status command from user EXEC mode:
Switch# show atm rmon status
PortSelGrp: 1 Status: Enabled
PortSelGrp: 2 Status: Enabled
PortSelGrp: 3 Status: Enabled
PortSelGrp: 4 Status: Enabled
PortSelGrp: 5 Status: Enabled
PortSelGrp: 6 Status: Enabled
PortSelGrp: 7 Status: Enabled
PortSelGrp: 8 Status: Enabled
PortSelGrp: 9 Status: Enabled

Enabling ATM RMON Data Collection

Use the atm rmon enable command to start ATM RMON data collection.
If you disable ATM RMON the configuration remains but becomes inactive (similar to using the
Note
shutdown command on an interface).
To enable ATM RMON data collection, use the following command in global configuration mode:
Command
atm rmon enable
OL-7396-01
Collection: Enabled
Collection: Enabled
Collection: Enabled
cells: 0 connTime: 0 days 00:00:00
cells: 0 connTime: 0 days 00:00:00
ATM0/0/0 ATM0/0/2
ATM0/0/3
ATM0/1/0 ATM0/1/1
ATM0/0/1
ATM0/1/2
ATM0/1/3
ATM2/0/0
Drops: 0
Drops: 0
Drops: 0
Hosts: 4/no-max Matrix:
Hosts: 0/no-max Matrix:
Hosts: 0/no-max Matrix:
Hosts: 0/1 Matrix: 0/5
Hosts: 0/no-max Matrix:
Hosts: 0/no-max Matrix:
Hosts: 0/no-max Matrix:
Hosts: 0/no-max Matrix:
Hosts: 0/no-max Matrix:
Purpose
Enables ATM RMON.
ATM Switch Router Software Configuration Guide
Configuring ATM RMON
4/no-max
0/no-max
0/no-max
0/no-max
0/no-max
0/no-max
0/no-max
0/no-max
15-17