Basic Operations; Volume Setting; Entering Main Menu; Programme Selection (Previous Or Next Programme) - Hitachi 37LD8D20U Instructions For Use Manual

Country
Language
TXT Language
PLEASE CHECK ANTENNA CABLE
AUTO PROGRAMMING SYSTEM
UK
By pressing / button, adjust the Country item and
press " " to highlight "Language" item. Use
button to set "Language". Use
select "TXT Language" and set it by using
buttons. Press "OK" button to continue:
APS is running...
UK
P 03 - C 04
After APS is finalized, a programme list will appear on
the screen. In the programme list you will see the
programme numbers and names assigned to the
programmes.
If you do not accept the locations and / or the
programme names of programmes, you can change
them in Insall Menu. For details see "Install Menu"
section.
To display channel list in IDTV, switch to the IDTV via
TV DTV
pressing the "
button to enter main menu, Channel List will be high-
lighted. Press the "SELECT" button to enter the menu.
Ok
Cancel
/ buttons to
63.75 MHz
6%
63.75 MHz
Cancel
" button. Then press the "M"

Basic Operations

You can operate your TV using both the remote
control and onset buttons.
Operation with the buttons on the TV

Volume Setting

• Press "
button to increase volume, so a volume level scale
(slider) will be displayed at the middle of the bottom
on the screen.
Programme Selection
• Press "P/CH +" button to select the next programme
or "P/CH -" button to select the previous programme.

Entering Main Menu

• Press the "MENU" button to enter Main menu. In the
Main menu select sub-menu using "P/CH -" or
/ "P/CH +" buttons and enter the sub-menu using "
-" or "
/ menus, refer to the Menu System sections (pages
13 or 19).
AV Mode
Press the "TV/AV" button at the control panel on the
the TV to switch your TV to AV modes.
Operation with Remote Control
The remote control of your TV is designed to control
all the functions of the model you selected. The func-
tions will be described in accordance with the menu
system of your TV.
Functions of the menu system are described in the
following sections.
Volume Setting
Press " V +" button to increase volume. Press "V -"
button to decrease volume. A volume level scale
(slider) will be displayed in the middle at the bottom of
the screen.
Programme Selection (Previous or next
programme)
• Press "P-" button to select the previous programme.
• Press "P+" button to select the next programme.
Programme Selection (direct access)
Press digit buttons on the remote control to select
programmes between 0 and 9. TV will switch to the
selected programme. To select programmes between
10 - 999 (for IDTV) or 10-99 (for analogue), press the
digit buttons consecutively which programme you
want to select (eg. for programme 27, first press 2
and then 7). When it is too late to press second digit
button only the first digit programme will be displayed.
The limit of the delay time is 3 seconds.
English - 10 -
-" button to decrease volume or "
+" buttons. To learn the usage of the
+"