Basic Operations; Operation With The Buttons On The Tv; Volume Setting; Programme Selection - Hitachi L19HP03U Instructions For Use Manual

Basic Operations

You can operate your TV using both the
remote control and onset buttons.

Operation with the Buttons on the TV

Volume Setting

• Press - button to decrease volume or
+ button to increase volume, so a volume
level scale (slider) will be displayed on the
screen.

Programme Selection

• Press P/CH + button to select the next
programme or P/CH - button to select the
previous programme.

Entering Main Menu

• Press the MENU button to enter main menu.
In the Main menu select sub-menu using P/
CH - or P/CH + buttons and enter the sub-
menu using - or
the usage of the menus, refer to the menu
system sections.

AV Mode

• Press the TV/AV button at the control panel
on the the TV to switch your TV to AV modes.

Operation with the Remote Control

• The remote control of your TV is designed to
control all the functions of the model you
selected. The functions will be described in
accordance with the menu system of your
TV.
• Functions of the menu system are described
in the following sections.
Volume Setting
Press V + button to increase the volume.
Press V - button to decrease the volume. A
volume level scale (slider) will be displayed
on the screen.
HITACHI-ENG-19856W-UK IDTV-1055UK-VGA-(LIPS)-10059155-50138612.p65
Programme Selection (Previous or
Next Programme)
• Press P - button to select the previous programme.
• Press P + button to select the next programme.

Programme Selection (Direct Access)

•Press numeric buttons on the remote control
+ buttons. To learn
• Press directly the programme number to
- 18 -
18
to select programmes between 0 and 9. The
TV will switch to the selected programme.
To select programmes between
IDTV) press the
consecutively (e.g. for programme 27, first
press 2 and then 7). Use -/-- button to select
programmes between 10-99 in analogue
mode. When the pressing time is due for
the second numeric button, only the first digit
programme will be displayed. The limit of
the delay time is 3 seconds.
reselect single digit programmes.
13.11.2008, 12:58
10 - 999 (for
numeric buttons