Picture Zoom; Reset; Sound Menu; Equalizer - Hitachi 37LD8D20U Instructions For Use Manual

3D Comb
3D Comb is used to improve colour transitions and
colour quality of pictures.
By pressing / button, select 3D Comb. Press
/ button to set this feature On or Off.
Note: 3D Comb feature is not functional in NATU-
RAL picture mode.

Picture Zoom

By pressing /
Use / buttons, to change picture zoom to Auto,
16:9, 4:3, Panaromic, 14:9 Zoom, Cinema, Sub-
title, or Zoom.

Reset

By pressing / button, select Reset. Press
"OK" button to reset the picture modes to factory
default settings.

Sound Menu

SOUND

Volume

Equalizer

Balance

Headphone

Sound Mode

Volume
By pressing /
button to change the level of the Volume.
Equalizer
By pressing /
button to change the Equalizer setting. In equalizer
menu, the mode can be changed to Pop, Rock, Jazz,
Flat, Classic or User. Select the desired frequency
by / button and increase or decrease the fre-
quency gain by pressing
Note: Equalizer menu settings can be altered only
when the Equalizer Mode is in User.
Balance
By pressing / select Balance.Press
to change the level of the balance.Balance level can
be adjusted between -32 and +32.
button select Picture Zoom.
select Volume. Press
select Equalizer. Press
/ button.
Headphone
By pressing
button to enter hedphone menu.
volume
By pressing
button to increase hp volume level. Press
decrease hp volume level. Headphone volume level
can be adjusted between 0 and 63.
sound mode
By pressing
/ button to change sound mode.
Sound mode is used to identify sound mode of the
headphone and can be set to mono, stereo, dual I or
dual II according to the transmission.
or
balance
By pressing
button to increase balance to the right. Press
button to decrease balance to the left. Balance level
can be adjusted between -32 and +32.
Press the "M" button to return to the previous menu.
Sound Mode
By pressing
button, you can select Mono, Stereo, Dual I or Dual II
mode, only if the selected channel supports that mode.
AVL
By pressing
set the AVL as on or off.

Effect

By pressing
to set Effect as on or off.

Dynamic Bass

Dynamic Bass is used to increase bass effect of the
TV set.
/
By pressing
pressing
or Off. It is not recommended to select High if listening
at high volume levels. There is a subwoofer output
/
that can accept an active subwoofer if you wish to
create very high levels of Bass.
Subwoofer is active only if Dynamic Bass is set to
Off.

Subwoofer

It is possible to connect an external, active subwoofer
to the set to give a much deeper bass effect.
By pressing
Subwoofer can be set to On or Off.
/ button
Dynamic Bass is not available if Subwoofer is set to
On.
English - 20 -
/ button, select Headphone. Press
/ button, select Volume. Press
/ button, select Sound Mode. Press
/ button, select Balance. Press
/ select Sound Mode. Press
/ select AVL VL.Press
/ select Effect.Press
/ button, select Dynamic Bass. By
/ button set Dynamic bass to Low, High
/ button, select Subwoofer. .
button to
/
/ button to
/ button