Lightolier IS-EC1 Assembly And Installation Instructions

Philips lighting systems

Download this manual

IS_EC1

Lighting Systems

11"

We reserve the right to change details of design, materials and finish.

Page 1 IS_EC1 Lighting Systems 11” We reserve the right to change details of design, materials and finish.
Page 2: Junction Box
IS_EC1 Lighting Systems 48” or 96” 48” or 96” JUNCTION BOX (BY OTHERS) CANOPY CANOPY POWER CANOPY POWER CORD Figure 1 S. R. L. CORD (OPTIONAL) CABLE POWER CORD AC SUPPLY (MALE PLUG) FEMALE PLUG 10-32 SCREW S. R. L. CORD (OPTIONAL) S.
Page 3 IS_EC1 Lighting Systems Step 1. Installing the Suspension Cables Step 2. Installing the First Fixture Step 3. Installing the Remaining Fixtures Step 4. End of Row We reserve the right to change details of design, materials and finish.
Page 4 IS_EC1 Lighting Systems Step 1. Modifying Master Unit NOTE: In some instances some of the wires in the ﬁxture are required to remain uncut. (DALI, SHARING DAYLIGHT SENSOR , ETC.) In this case cut plug from secondary power cord and only cut and tap into the hot and neutral wires in the thru-harness. POWER CORD 1ST POWER DROP 2ND POWER DROP...
Page 5 IS_EC1 Lighting Systems Installing the ECS400T Ground (Green) Common (White) Hot (Black) Ground (Green) Ground (Green) Building’s Electrical ECS400T System White Relay Common Black Installing the ECS100L Common +24V in N.O. Figure 4 Common (White) Common (White) Ground (Green) Hot (Black) Hot (Black) Ground (Green) Ground (Green)

Energos ec1