Understanding Auto Eq Error Messages; Understanding Messages - Pioneer AVH-X6500DVD Owner's Manual

Appendix
Additional information
Message Cause Action
Pandora sys- Pandora system Try again later.
tem mainte- is undergoing
nance. Try maintenance.
again later.
Skip limit
Skip limit Do not exceed the
reached. reached. skip limit.
This version This version of Connect an
of the the Pandora ap- iPhone that has a
Pandora Ap- plication is not compatible ver-
plication is supported. sion of the
not sup- Pandora applica-
ported. tion installed.
Check Device Device error
Please check your
message dis- iPhone.
played in the
Pandora appli-
cation.
Pandora is Unable to play Please check your
unable to music from iPhone.
play music. Pandora.
Please see
your Device.
Create sta-
No station Create a station
tion within found. in the Pandora
the Pandora application on
Application your iPhone.
on Device.
No Active No station se- Select a station.
Station lected.
52
En
Message Cause Action
Communica- If there is no Please reconnect
tion error oc- ACK after 10 at- your iPhone and
cured. Please tempted retries try again.
reconnect
at 750 ms, the
your device.
accessory
should assume
that communi-
cation is inter-
rupted and
disconnect
from
PandoraLink.
Device has No Bluetooth Follow the in-
not been device found. structions that ap-
registered.
pear on the
Go to
screen.
Bluetooth
Connection
Menu to
register.
BT error. Bluetooth con- Follow the in-
Press BAND nection failed. structions that ap-
key to retry. pear on the
screen.
Start up
Connection to Follow the in-
Pandora. the Pandora ap- structions that ap-
Press BAND plication failed. pear on the
key to retry. screen.
Check Connection to Follow the in-
Pandora. the Pandora ap- structions that ap-
Press BAND plication failed. pear on the
key to retry. screen.
Disconnect-
Bluetooth con- Follow the in-
ed.Press
nection lost. structions that ap-
BAND key to pear on the
retry. screen.
Additional information
Understanding auto EQ error
messages
When correct measurement of the car's interior
acoustic characteristics is not possible using
auto EQ, an error message may appear on the
display. In such cases, refer to the table below to
see what the problem is and how it may be cor-
rected. After checking, try again.
Message Cause Action
Please con- The microphone Plug the optional
nect the mi- is not con- microphone se-
crophone for nected. curely into the
measure- jack.
ment. When
finished,
please push
HOME key.
! Confirm that
Error. Please The microphone
check xxxx cannot pick up the speakers are
speaker. the measuring connected cor-
tone of a speak- rectly.
! Correct the
er.
input level setting
of the power amp
connected to the
speakers.
! Plug the micro-
phone securely
into the jack.
! Stop your car in
Error. Please The surround-
check noise. ing noise level a place that is
is too high. quiet, and switch
off the engine, air
conditioner and
heater.
! Set the micro-
phone correctly.
Message Cause Action
! Connect the
Error. Please Power is not
check bat- being supplied battery correctly.
! Check the bat-
tery. from the battery
to this unit. tery voltage.

Understanding messages

Messages Translation
Pioneer recommends
the use of a camera
which outputs mirror-
Screen image may
reversed images. Oth-
appear reversed.
erwise, the screen
image will appear re-
versed.