Speaker Setup - Marantz AV7005 User Manual

ENGLISH DEUTSCH
Manual Setup

Speaker Setup

Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup.
• If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to select
MultEQ XT, Dynamic EQ and Dynamic Volume (vpage 74, 75).
• Manual Setup can be used without changing the settings. Please set if necessary.
n Audio output from each PRE OUT terminal
UNBALANCED PRE
FL/FR C SW1/SW2
OUT terminal
BALANCED PRE
FL/FR C SW1/SW2
OUT terminal
Subwoofer 1 /
Audio Output Front A Center
Subwoofer 2
*The output audio differs depending on the "Amp Assign" settings.
Setting items
Normal : Set when using surround back, front height or front wide
Amp Assign
Set the speakers connected speakers.
to the UNBALANCED and ZONE2 : Set for connecting the speakers for ZONE2.
BALANCED PRE OUT SBL/ ZONE3 : Set for connecting the speakers for ZONE3.
SBR terminals of the power SPKR-C : Set for connecting the tweeter of the front speaker to the
amp. UNBALANCED and BALANCED PRE OUT SBL/SBR terminals of the
power amp, and the woofer of the front speaker to the FL/FR terminals.
Speaker Config. Front : Set the front speaker size.
Select speaker configuration • Large : Use a large speaker that can adequately play back low
and size (bass reproduction frequencies.
capability). • Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
NOTE
Do not use the outward
• When "Subwoofer" is set to "No", "Front" is automatically set to
shape of the speaker to
"Large".
determine selection of a
• When "Front" is set to "Small", "Center", "Surround", "S.Back",
"Large" or "Small" speaker.
"F.Height" and "F.Wide" can not be set to "Large".
Instead, use the frequencies
Center : Set the presence and size of the center speaker.
set in "Crossover
• Large : Use a large speaker that can adequately play back low
Frequency" (vpage 80) as
frequencies.
the standard for determining
• Small : Use a small speaker that has inadequate playback capacity for
bass reproduction capability.
low frequencies.
• None : Select when a center speaker is not connected.
"Large" is not displayed when "Front" is set to "Small".
Subwoofer : Set the presence of a subwoofer.
• Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.
When "Front" is set to "Small", "Subwoofer" is automatically set to "Yes".
78
Remote control operation
buttons
FRANÇAIS ITALIANO ESPAÑOL
Default settings are underlined.
PRE OUT Channel
SL/SR SBL/SBR HL/HR
SL/SR SBL/SBR ---
Surround Front Height /
Surround
Back* Front B
Setting details
Move the cursor
(Up/Down/Left/Right)
NEDERLANDS SVENSKA
Setting items
Speaker Config.
(Continued)
WL/WR
---
Front Wide
Confirm the setting
Setting details
Surround : Set the presence and size of the surround speakers.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the surround speakers are not connected.
• When "Surround" is set to "Large", "S.Back", "F.Height" and "F.Wide"
can be set to "Large".
• When "Surround" is set to "None", "S.Back", "F.Height" and "F.Wide"
can automatically set to "None".
S.Back : Set the presence, size and number of surround back speakers.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the surround back speakers are not connected.
• 2spkrs : Use two surround back speakers.
• 1spkr : Use only one surround back speaker. When you select this
setting, connect the surround back speaker to the left (L) channel.
Even when the "S.Back" setting is other than "None", sound may
not be emitted from the surround back speaker, depending on the
playback source.
NOTE
When "Amp Assign" setting (vpage 78) is other than "Normal", you
cannot make the "S.Back" setting.
F.Height : Set the presence and size of the front height speakers.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the front height speakers are not connected.
NOTE
When "Amp Assign" setting (vpage 78) is other than "Normal", you
cannot make the "F.Height" setting.
Return to previous menu