Specifications; Cover Assembly - Chicago Electric 68887 Owners Manual & Safety Manual

Specifications

Electrical Rating
Welding Output
Capacity
Duty Cycle
Open Circuit Voltage
KVA
Welder Tips / Wire Size
Wire Spool Capacity
Setup
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch off and unplug the welder before assembly.

Cover Assembly

1. Slide the Handle into the slot on
the Cover from the back.
2. The notch on the front of the Handle should drop
into the slot in the Cover. Both ends of the Handle
should lay flush against the top of the Cover.
3. Secure with Screw at front of unit.
SKU 68887
120V~ / 20A
60 ~ 120 A, AC
18 gauge (0.048") to 3/16" (0.19") mild steel only
Not for welding aluminum or stainless steel
20% @ 90A
(See explanation on page 14)
27
2.38
Installed tip will accept .030" to .035" FLUX CORE wire
4" diameter / 2 lb. spool
For technical questions, please call 1-800-444-3353.
notch drops
Handle
into slot on
Cover here
Cover
Screw
Page 7