Chicago Electric 68887 Owners Manual & Safety Manual page 10

14. Do not touch the Gun's Trigger.
Plug the Power Cord into its electrical
outlet and turn the welder to ON.
15. Point the Gun away from all objects and press the
Trigger until the wire feeds out of the gun two inches.
The Wire Liner may come out with the welding
wire, this is normal, just push the Wire Liner
back into the Gun.
If the wire does not feed properly and the
Spool is stationary, turn the welder to OFF,
unplug it, and slightly tighten the Feed
Tensioner clockwise before retrying.
Page 10
The following steps require applying power to the welder
To prevent serious injury from fire or electric shock:
1. Do not touch anything, especially not the Ground Clamp,
with the Gun or welding wire or an arc will be ignited.
2. Do not touch internal welder components
while it is plugged in.
For technical questions, please call 1-800-444-3353.
WARNING
with the cover open.
Welding
Wire
GUN
90 AMP FLUX WIRE WELDER
ITEM 68887
ON MIN
OFF MAX
WIRE FEED SPEED Wire .030"-.035" Flux-core
Capacity XX Ga. – X/X" Steel Plate
Electrode – X'
Cables
Ground Clamp – X'
GROUND
120V~
60Hz
20A
Gun
SKU 68887