Hitachi CMP4202E User Manual page 33

PRODUCT SPECIFICATIONS (continued)
Recommended Signal List (continued)
With Composite/S-video Input(VIDEO1 input).
This function can only be used when the optional video unit has been inserted.
No.
Signal Name Resolution
NTSC
NTSC-4.43
1
M-PAL
PAL60
PAL
2 N-PAL
SECAM
With R, G, B Video input (VIDEO1 and VIDEO2 input).
This function can only be used when the optional video unit has been inserted.
No.
Signal Name Resolution
1 SCART
With component input (VIDEO2 input)
This function can only be used when the optional video unit has been inserted.
No.
Signal Name Resolution
1 480/60i
2 576/50i
3 576/50p
4 480/60p
5 720/60p
6 1080/50i
7 1080/60i
8 1035/60i
• The type of video board or connecting cable used may not allow for correct displays adjustment of H.POSITION, V.POSITION, CLOCK and
PHASE.
• The monitor may fail to display an animation image correctly when a signal having a vertical frequency of 85Hz or higher is input to it.
• The monitor differentiates the signal modes according to the horizontal and vertical frequencies and the horizontal and vertical sync signal
polarities. Note that different signals having all these elements alike may be handled as the same signal.
• Displaying images with more than 512 lines of vertical resolution at Full diplay (compressed display) can result in the interpolation of stripes.
Signal mode
Vertical frequency
(Hz)
525 59.94
625 50.00
Signal mode
Vertical frequency
(Hz)
NTSC 59.94
PAL 50.00
Signal mode
Vertical frequency
(Hz)
480 59.94
576 50.00
576 50.00
480 59.94
720 59.94
1080 50.00
1080 60.00
1035 60.00
Horizontal Dot clock
frequency (kHz) frequency (MHz)
15.73
15.63
Horizontal Dot clock
frequency (kHz) frequency (MHz)
15.734
15.625
Horizontal Dot clock
frequency (kHz) frequency (MHz)
15.73
15.63
31.26
31.47
44.96
28.13
33.75
33.75
Remarks
Remarks
Remarks