Picture Menu - Hitachi CMP4202E User Manual

OPERATING INSTRUCTIONS (continued)

PICTURE MENU

MAIN MENU
PICTURE
MENU
SOUND
DISPLAY
FUNCTION
OTHER
SEL. ENT ENT. RTN END
Selected characters
OPERATE MODE
Narrows the gap between
CONTRAST
brightness and darkness.
Black is subdued for
BRIGHTNESS
increasedoverall darkness.
COLOR
Lightens colors.
Enhances red and weakens
TINT
green.
ENHANCER
FILTER
RESET
MODE
GAMMA
2.2
VIDEO LEVEL
0.7
COLOR TEMP.
R-GAIN
Red is weakened.
G-GAIN
Green is weakened.
B-GAIN
Blue is weakened.
ENTER
NORMAL LIFE EXTEN.1
Broadens the gap between
brightness and darkness.
Black is set off for increased
overall brightness.
Darkens colors.
Enhances green and
weakens red.
OFF LOW MID
2.8
1.0
COOL NORM WARM
Red is strengthened.
Green is strengthened.
Blue is strengthened.
RGB
PICTURE MENU 1/2
OPERATE MODE : NORMAL
CONTRAST : 127
BRIGHTNESS : 0
COLOR : 0
TINT : 0
ENHANCER : LOW
FILTER : OFF
RESET
SEL. ENT ENT. RTN BACK
PICTURE MENU 2/2
MODE : PC
GAMMA : 2.2
VIDEO LEVEL : 0.7V
COLOR TEMP. : COOL
R-GAIN : 255
G-GAIN : 255
B-GAIN : 255
SEL. ADJ. RTN BACK
By controlling the brightness of a screen, power consumption can be
LIFE EXTEN.2 reduced or degradation of a panel can be mitigated. The order of
effectiveness in reducing power consumption and reducing panel
degradation is LIFE EXTEN.2 > LIFE EXTEN.1 > NORMAL.
Adjust for maximum visibility to suit the ambient brightness.
Cannot be used when LIFE EXTEN1, 2 are selected.
Adjust to prevent black from spreading across the screen.
Adjust for desired density, somewhat for lighter colors for a natural
look.
Adjust for a nice looking skin color.
HIGH
Sets the clarity of small details to the desired level.
Only displayed for RGB signals. Turn ON when concerned about
screen flicker.
The original factory settings can be restored by pressing the ENTER
button.
Set to MOVIE when viewing moving images on a personal computer.
Normally set to 2.2.
Normally set to 0.7 V. If white is found to spread across the screen,
set to 1.0 V.
USER
Normally set to COOL.
Sets the color adjustment selected by the user with COLOR TEMP..
USER mode takes effect automatically when an attempt is made to
set a gain.
(This function can only be used when the optional
video unit has been inserted.)
VIDEO
PICTURE MENU 1/3
OPERATE MODE : NORMAL
CONTRAST : 127
BRIGHTNESS :
COLOR :
TINT :
SHARPNESS :
RESET
SEL. ENT ENT. RTN BACK
PICTURE MENU 2/3
VIDEO PICTURE : NORMAL
CONTRAST MODE : DYNAMIC
BLACK STRETCH : OFF
LTI : LOW
CTI : LOW
YNR : LOW
CNR : LOW
RESET
SEL. ADJ. RTN BACK
PICTURE MENU 3/3
3D COMB : ON
FILM MODE : ON
GAMMA : 2.2
LINE INTP. : OFF
COLOR TEMP. : COOL
R-GAIN : 255
G-GAIN : 255
B-GAIN : 255
SEL. ADJ. RTN BACK
Setup hint
0
0
0
0