Wire Colors; Connection Points For Connection Cables - Eclipse AVN2454 Installation Manual

Wire colors and connection points for connection cables
Never connect the power supply to the speaker leads (No.6 and No.7),
otherwise it will cause damage to the main unit.
Caution
B+ (Yellow)
1
Connect where power is constantly available, regardless of the ignition key's position.
ACC (Red)
2
Connect where the power comes on when the ignition is in the ACC position.
Illumination power supply (Orange/White)
3
Connect to where power comes on when the vehicle light switch is turned on.
Antenna power supply (Blue)
4
Connect to the automatic-antenna control terminal of the vehicle.
Control power supply (Blue/White)
5
Connect the control terminal for the external amplifier, etc.
Front speaker output leads
6
Connect to the front speakers.
Rear speaker output leads
7
Connect to the rear speakers.
Ground (Black)
8
Connect where good body grounding is available.
ACC ON/OFF power supply terminal (blue/white)
9
If you use this terminal to connect equipment such as an external amplifier, you can still hear the audio guidance
from the navigation system even when audio is turned off. Connect it to the control terminal for the external
amplifier or other equipment.
A popping noise may be heard when the engine is being started or the ignition switch is at the ON position, but
this is normal and is not the sign of a malfunction.
Wire colors and connection points for connection cables
Vehicle speed pulse signal terminal (Purple/White)
10
Connect to the vehicle speed pulse signal terminal.
Parking brake signal (Red/White)
11
Connect to the parking brake signal terminal.
Reverse signal Wire (Green)
12
Connect the reverse signal output of the vehicle to this terminal.
White: Left +
Gray: Right +
Green: Left +
Purple: Right +
- 7 -
White/black: Left -
Gray/Black: Right -
Green/black: Left -
Purple/Black: Right -
and
2 3
4