Changing The Dial Mode - Motorola ME4251 series User Manual

BD1217 ME4251 user guide [5]
If you want all handsets to ring and no handset to have priority, select All.
In the base settings menu:
1. Press the
2. Press the
key to confirm.
3. Press the
other handsets start to ring (for example, for 4 times, select Ringtimes 4) and press
the SKL key to confirm. Set ok is displayed.
4. Press the

Changing the Dial Mode

Your ME4251 telephone uses DTMF (Tone dialling) as the pre-set dialling mode.
When using your telephone with some switch boards/PBX networks you
may be required to change to PULSE dialling.
Note: Consult your switchboard provider if you are unsure which mode to use.
In the base settings menu:
1. Press the
2. Press the
confirm. Set ok is displayed.
3. Press the
46
18/7/05
or key to display Priority Call Aler t and press the SKL key to select.
or key to select the handset you want to ring first and press the SKL
or key to select the number of times the handset will ring before the
key to return to standby mode.
or key to display Dial Mode and press the SKL key to select.
or key to select either DTMF or Pulse and press the SKL key to
key to return to standby mode.
Page 46