Changing The Pin Code; Changing The Flash Time - Motorola ME4251 series User Manual

BD1217 ME4251 user guide [5]

Changing the PIN Code

For increased security you may want to change the PIN code to prevent any
unauthorised changes being made to the settings on your telephone.
Always keep a note of the new PIN code.
In the base settings menu:
1. Press the or
2. Enter the current PIN (pre-set code 0000) and press the SKL key to confirm.
3. Enter a new 4-digit PIN code and press the SKL key.
4. Re-enter the new PIN code and press the SKL key to confirm.
Set ok is displayed.
5. Press the
Changing the Flash Time (Recall)
You can change the recall (flash) time according to your Switchboard/PBX
requirements. The recall times you can set are: 100, 250 and 600 msec.
The pre-set recall time is 100 msec.
Note: Consult your switchboard/PBX provider for advice if unsure which setting
you need.
In the base settings menu:
1. Press the or
2. Press the or
Set ok is displayed.
3. Press the
18/7/05
key to display System PIN and press the SKL key to select.
key to return to standby mode.
key to display Flash Time and press the SKL key to select.
key to select 100, 250 or 600 and press the SKL key to confirm.
key to return to standby mode.
Page 49
49