Table of Contents
Advertisement
Turk/Gre or Arabic. This will normally be set
to West for Western Europe.
Screen Saver
By pressing
/
Saver. Press
/
screen saver menu.
This menu has three items related to pos-
sible image retention problem in plasma
display panels. First two items (Screen
Wipe, Inverse) of this menu are used to re-
move the effects after the problem occured
and the last item (Pixel Shift) is used to pre-
vent this problem.
Screen Wipe : When OK is pressed on this
item the panel is driven with full white picture
for one hour unless any user command is
entered. During this mode if any user com-
mand is entered, Screen Saver menu will be
displayed on the screen with Screen Wipe
highlighted.
Inverse: When OK is pressed on this item
the colour of each pixel of the displayed im-
age is inverted for one hour unless any user
command is entered.
Pixel Shift : This item can be set to off, 5,
10, 20, 40 min. or 1 hour. Whole picture is
shifted 2 pixels in the directions of the figure
shown below.
4
3
The time entered in this setting refers to the
time between the picture being moved. If you
are using games consoles or similar set to
5 mins but try not to leave static images on
the screen for long periods of time.
Install menu
By pressing
/
icon. Install menu appears on the screen.
button, select Screen
or "OK" button to enter
5
Pixel
1
2
button, select the fourth
Program
Band
Channel
Colour System
Sound System
Fine Tune
Search
VCR
Store Program
Program
By pressing
Press
/
button to select the program
number. You can also enter a number via
digit buttons on the remote control. There
are 100 program storage between 0 and 99.
Band
Band can be selected either "C" or "S" by
pressing
/
button.
Channel
Channel can be changed by
Digit Buttons.
Colour System
By pressing
System. Press
colour system to PAL, PAL60, SECAM or
AUTO.
Note: In
AV
mode, you can choose NTSC
3.58 and NTSC 4.43 as well.
Sound System
By pressing
System. Press
sound system to BG, DK, I or L/L'.
Fine Tune
By pressing
Press
/
button to adjust the tuning.
Search
By pressing
Press
/
button to start program search-
ing. The searching will stop when a signal is
- 25 -
INSTALL
1
C
12
AUTO
BG
224.25
Off
/
button, select Program.
/
/
button, select Colour
/
button to change the
/
button, select Sound
/
button to change the
/
button, select Fine Tune.
/
button, select Search.
0
button or
Advertisement
Table of Contents
