Feature Menu - Hitachi 42PD8700C Instructions For Use Manual

Table of Contents

Advertisement

SubWoofer
It is possible to connect an external, active
subwoofer to the set to give a much deeper
bass effect.
By pressing
/
Subwoofer can be set to On or Off.
Set Subwoofer to On when you connect an
external subwoofer to the set.

Feature menu

By pressing
/
button, select the third icon.
Feature menu appears on the screen.
Sleep Timer
Child Lock
Language
Av-2 Out
Default Zoom
Blue Background
Menu Background
Menu Timeout
Teletext Language
Screen Saver
Sleep Timer
By pressing
/
Timer. The timer can be programmed be-
tween Off and 2 hours in steps of 10 min-
utes by pressing
is activated, at the end of the selected time,
the TV goes automatically to stand-by mode.
Child Lock
You can use this feature to prevent children
turning the TV on or changing programs or
adjustments etc. without remote control.
The child lock feature can be set by
ton to either on or off. When off is selected,
there will be no difference in the operation of
your TV. When on is selected, the TV can
only be controlled by the remote control
handset. In this case the control panel but-
tons, except the Power on/off button, at the
bottom of the TV will not work. If one of these
buttons is pressed, "Child Lock On" will be
displayed on the screen.
button, select Subwoofer.
FEATURE
Off
Off
English
DTT
Panoramic
On
Translucent
30 sec
West
button, select Sleep
/
button. If sleep timer
/
Language
By pressing
By pressing
language.
AV-2 Out
By pressing
You can set AV-2 Out to TV, AV-1, DTT, AV-
3, AV-4, AV-5 or PC RGB by pressing
button.
Note: Only audio output is available for Av-4
and PC. The other options have both audio
and video outputs.
Default Zoom
By pressing
Zoom. You can set Default Zoom to Pan-
oramic, 4:3 or 14:9 Zoom by pressing
button. If there is no WSS or aspect ratio
(picture size) information and zoom mode is
selected as Auto by pressing the
then the zoom mode will automatically
change to Default Zoom setting. See also
Zoom Modes on page 29.
Blue Background
You can set the TV to automatically change
to a blue screen if the signal is weak or ab-
sent, or when there is no input from an exter-
nal device.
The Blue Background feature can be turned
on or off by pressing
Menu Background
By pressing
Background. You can change menu back-
ground to Translucent or Opaque by press-
ing
/
button.
but-
Menu Timeout
By pressing
Timeout. Press
timeout to 15 sec, 30 sec or 60 sec.
Teletext Language
By pressing
Language. Press
Teletext Language to West, East, Cyrillic,
- 24 -
/
button, select Language.
/
button, you can select the
/
button, select AV-2 Out.
/
button, select Default
/
button.
/
button, select Menu
/
button, select Menu
/
button to change menu
/
button, select Teletext
/
button to change
/
/
button,

Advertisement

Table of Contents
loading

Table of Contents