Hitachi 42PD8700C Instructions For Use Manual page 17

Selecting "No" cancels Automatic Search.
After search is completed for digital chan-
nels, a message asking search for ana-
logue channels appears on the screen.
Do you want to search for
analogue channels?
Yes
Highlight "Yes" and press "SELECT" button
to searh for analogue channels.The follow-
ing menu appears on the screen for ana-
logue channel search.
AUTO PROGRAM
Language
Country
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
Press the BLUE button to cancel APS if you
d o n o t wan t t o d e l e t e yo u r e xi s t i n g
programme list.
To continue APS, first select the language
and country by pressing
then press the RED or "OK" button.
APS is running...
UK - I
After APS is finalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers
and names assigned to the programmes.
If you do not accept the locations and / or the
programme names, you can change them
in aps sub-menu in the settings menu.
All the services are searched and a channel
table is created automatically.
All channels found are stored in a sorted
form with respect to their channel numbers.
Some services may not appear with the cor-
rect channel number. At the time of printing,
No
English
UK
OK Cancel
/ button and
055,25 Mhz
Cancel
- 16 -
not all broadcasters are sending their chan-
nel number information.
Manual Search:
In Manual Search, the number of the multi-
plex is entered manually and only that multi-
plex is searched for the channels. For every
valid channel number, signal level, signal
quality and network name are shown at the
bottom of the screen.
In both manual and auto search any existing
channel in the database is not re-stored to
avoid redundant duplicates of that channel.
First Time Installation
The user can use this item to load default
settings, which had been loaded to the re-
ceiver at the factory.
To install factory settings, highlight "First
Time Installation" menu item and press
"OK" button, then you will be asked to tings.
Selecting "Yes" by pressing "OK" button
while the "Yes" is highlighted and then the
existing channel table will be deleted.
Are you sure you want to delete all channels and
settings for first time installation?
Yes
After factory settings areloaded, "First Time
Installation" menu will be displayed.
The menu which is displayed for language
selection appears on the screen at first. By
using or buttons, select the desired
language option, and press "OK" button to
activate.
After the language is selected, a message
asking for automatic search start appears
on the screen.
Do you want to start automatic search?
Yes
Highlight "Yes" item by pressing
buttons and press "OK" button to start instal-
lation. After search is completed for digital
channels, a message asking search for
analogue channels appears on the screen.
No
No
or