Locking The Projector - Epson PowerLite Presenter User Manual

Locking the Projector

You can lock the projector with a password to prevent unauthorized
people from using it. When the password lock is active, a password
entry screen will display each time you turn the projector on after it has
been unplugged.
1. Hold down the
Password Protect menu:
2. Press to select
.
3. Press to highlight
4. When you see the message
5. Set the toggle switch on the remote control to the
number using the numeric buttons. When you enter the fourth digit, a confirmation
screen is displayed.
6. Enter the password again. A confirmation message is displayed.
7. Press to exit the menu.
When you turn the projector on and see the password entry screen, set the toggle switch on
the remote control to the
buttons.
button for at least 5 seconds. You see the
, press
Power On Protect
, then press
Password
Change the password?
position and enter the four digit password using the numeric
-Num
or to select , press
On
to select it.
, select and press
Yes
position, then enter a four digit
-Num
Doing More with PowerLite Presenter
, then press
.
47