Epson PowerLite Presenter User Manual page 36

5. Connect the flat end of the cable to any available USB port on your notebook or desktop
computer.
Messages appear as the projector is recognized and the software installation begins.
6. Follow the instructions on your computer screen to install the Epson USB Display
software. If you see a "Digital Signature Warning," select Continue. You will only need to
install the software the first time you connect.
7. After the software has installed, you see your computer's desktop displayed by the
projector. (It may take a moment.)
8. If you want to play audio from the computer through the projector, you also need to
connect a stereo mini-jack cable to the projector's RCA stereo
Connect the other end of the cable to the audio output connector(s) on your computer.
9. Normally, your projector selects the correct aspect ratio automatically. If you need to
change the aspect, press the
or
Zoom
When you are projecting through the USB port, you can use the
Down buttons on the projector's remote control to move through a Microsoft
slide show.
After your image appears, you may find that you need to adjust the position or shape of the
picture. Or you may need to focus or zoom the image. See "Adjusting the Picture" on
page 22.
36
Using PowerLite Presenter with Other Equipment
(if available for the video source you're using).
button on the remote control and select
and Audio inputs.
L R
,
Normal 16:9
Page Up and
®
PowerPoint
,
Page