Connecting To The Pc Port - Epson PowerLite Presenter User Manual

Connecting to the PC Port

You will need a computer cable (D-sub 15-pin to D-sub 15-pin) and an RCA stereo audio
cable (2-RCA to stereo mini-pin). You can purchase these cables from an electronics store.
Caution: Before connecting, make sure all equipment is turned off.
1. Connect the computer or laptop as shown.
2. Connect the power cords and plug in all the equipment.
3. Open the lens cover and press the
remote control.
4. Press the button on the projector or the
5. When you see the menu, use the down-arrow or up-arrow button to select PC (if
necessary), then press the
control.
6. Turn on the power to the connected computer or laptop.
White
Red
D-sub 15-pin
computer cable
button on the projector or the
button on the projector or the
Using PowerLite Presenter with Other Equipment
RCA stereo
audio cable
button on the remote control.
button on the remote
button on the
37