If you remove the Flat cable from the printer mechanism, make sure that the Flat cable is fixed to
the frame firmly when assembling.
When you remove or replace the printhead unit, be sure to perform the following adjustments:
1) Ink Charge Operation
2) VH Setting
3) Head Angular Adjustment (Refer to Chapter 4 / Section 4.2.2.5.)
Rev. A
Figure 3-8. Printhead Unit Removal
CAUTION
REQUIRED ADJUSTMENT
(Refer to Chapter 4 / Section 4.2.2.3.)
(Refer to Chapter 4 / Section 4.2.2.4.)
Chapter 3 Disassembly and Assembly
3-11