Epson Stylus PHOTO 2000P Service Manual page 144

EPSON Stylus PHOTO 2000P
Table 6-2. Lubrication Point (continued)
Lubrication Point
17 The COMBINATION GEAR 13.5, 30
shaft in FRAME, LEFT
18 The LD roller assembly hole in the
FRAME, ASF; B
• Using a brush, apply the grease
evenly to the entire inside surface of
the hole.
19 The left and right latches in the
Hopper assembly along which the
hopper release levers turn.
• Use a brush to apply the grease.
20 GUIDE PLATE, CR
Never apply oil directly to the CR guide shaft. This may
W A R N I N G
cause fatal damage to the main components of the
printer.
Avoid applying too much oil to the oil pad. Otherwise, you
may critically damage the main components of the
printer.
MAINTENANCE
Lubricant Type &
Refer to:
Amount
G-26 Page 146
φ
1 x 5mm
G-26 Page 147
φ
1 x 1mm
G-26 Page 147
A 2-mm wide bead for
each
G-26 Page 147
φ
1 (See the figure for
length.)
Overview
G-26
Lubrication Point No.1
HOLDER, PULLEY, DRIVEN
G-26
Lubrication Point No.2
Revision A
G-26
G-26
G-26
144