Paper Eject Roller Cleaning - Epson Stylus PHOTO 2000P Service Manual

Color inkjet printer
Hide thumbs Also See for Stylus PHOTO 2000P:
Table of Contents

Advertisement

EPSON Stylus PHOTO 2000P

6.1.2.2 Paper Eject Roller Cleaning

The following printing may smear the paper eject roller with ink and may
lay the line on the print out. In such cases, use the cleaning kit included in
the printer and clean the paper eject roller. This operation can be carried
out by user.
When mistakenly printed on the back of the exclusive paper.
(except for EPSON exclusive double side print paper)
When printed on the paper that is not configured on the setting.
When printed on the special paper that is not appointed by
EPSON.
When printed on the huge amount of paper. (1000 sheets ~ 2000
sheets)
Cleaning kit
Cleaning assembly
The felt can be washed when it gets dirty.
Cleaning sheet
Can be substituted by plain paper.
Cleaning Method
1. Turn the printer OFF.
2. Drench the felt of the cleaning assembly and softly wring it until water
does not drops.
Do not use the cleaning assembly with the felt dried; it
C A U T I O N
may hurt the paper eject roller.
Do not use solvent such as alcohol, benzine and thinner.
Be careful that no water drops on the printer mechanism
or electric circuit.
3. Open the printer cover.
4. Press the power switch while pressing the ink cartridge replacement
switch. Printer enters into the paper eject roller cleaning mode.
NOTE: Until the paper check lamp, color / black ink end lamp lights on.
MAINTENANCE
5. Set the cleaning sheet to the printer.
NOTE: The cleaning sheet does not have the front face nor back face.
6. Press the paper eject switch.
7. The cleaning sheet will be ejected slowly. For the meanwhile, press
the cleaning assembly to the paper eject roller softly and clean the
paper eject roller.
Figure 6-1. Paper Eject Roller Cleaning
8. Keep cleaning until the paper eject roller gets cleaned. If the cleaning
sheet is ejected before the paper eject roller gets cleaned, load the
cleaning sheet again and keep cleaning.
9. When no dirt does not attach on the cleaning sheet, turn the printer
OFF and finishes the paper eject roller cleaning mode.
Overview
Revision A
140

Advertisement

Table of Contents
loading

Table of Contents