Epson STYLUS COLOR II Setup Manual page 43

Follow these steps:
1. Open the StylusCOLOR II folder and double-click
Bi-D Calibration Utility.
2. You see a prompt asking you to choose the interface type.
Click Serial.
3. You see the Bi-D Calibration Utility screen. First specify
whether you connected the printer to the modem or printer
port by clicking the appropriate icon.
4. Click the Pattern 1 button to align the print heads using the
first pattern page.
Wait for about two minutes while the printer prints a page
containing multiple patterns of vertical lines, each assigned
with an offset value. Look for the pattern that is most
closely aligned.
|
|
Aligned
5. Enter the offset value of the pattern that is most closely
aligned in the No. box and click OK. The printer prints a
confirmation page.
6. Repeat steps 4 and 5, selecting the Pattern 2 through
Pattern 5 buttons and entering the offset value of the
pattern that is most closely aligned on each pattern page.
7. When you finish, click Quit.
If you notice later that the vertical alignment of your printed
pages is off, repeat the calibration procedure.
|
|
Not aligned
Using the Printer Driver Utilities
3-3