Epson STYLUS COLOR II Setup Manual page 18

1. Make sure the printer is turned on.
2. Lower the output tray at the front of the printer. Then lift up
the printer cover using the notches at both sides.
Warning:
w
Never insert your hand into the paper path behind the
center of the cover; you may injure your hand.
3. Hold down the Alt button for about five seconds until the
print head moves slightly to the left, the ink cartridge
install position. The Pause light begins flashing.
Caution:
c
Never move the print head by hand; always use the Alt
button to move it.
1-6
Installing the Printer
2
1