Setting The Speed Of The Smoother Movement - Duerkopp Adler 744-122 Service Instructions Manual

9.5 Setting the Speed of the Smoother
Movement
The pull-out and return movements of the smoother
5 are to be quick but not jerky.
The speeds of the movements are regulated at the
one-way restrictors 10 and 11.
– One-way restrictor 10: Regulating return
movement
– One-way restrictor 11: Regulating pull-out
movement
The function "clamping before smoothing" can be
activated by the pre-selector b417.5 on the back of
the face plate of the control unit.
The speed of the smoothing movement after
clamping is to be regulated by the throttle 12,
located on the solenoid valve strip of the sewing
unit.
If necessary, readjust the smoothing movement of
the throttle 10 on the throw-over stacker.
10 11
12
27