Eclipse CD7200 mkII Installation Manual page 6

♦ ♦
System connection example / xample /
System connection e
Ejemplo de conexión del sistema / xión del sistema /
Ejemplo de cone
Exemple de conne Ex emple de connexion du système xion du système
English
Tip
• • Install and connect all of the peripheral units before
connecting them to the main unit.
• • Do not remove any of the protective caps (RCA, etc.) unless
the connectors are in use.
• • Be sure to wrap the connection wires with tape (PVC tape)
to insulate them.
1) CD7200 mk or CD3200 + iPC106 + CH3083 + MEI100 + Power Amplifer
TO BATTERY+12V
(Permanent Supply)
INTERCONNECTING WIRES
(supplied with iPC106)
TO GROUND
To iPod
INTERCONNECTING WIRES
INTERCONNECTING WIRES
(supplied with iPC106)
(supplied with iPC106)
TO USB DEVICE
iPC106
(sold separately)
2P
13P
13P
TO BATTERY+12V
NO CONNECTION
(Permanent Supply)
(Do not remove cap)
13P
2P
TO GROUND
TO ACC (Power Supply)
TO POWER ANTENNA
INTERCONNECTING
CH3083
WIRES
(sold separately)
(supplied with CH3083)
TO HEAD LIGHT SWITCH
TO TURN-ON WIRE
Tip
• • iPod is a trademark of Apple Inc., registered in U.S. and other countries.
• • iPod is for legal or right holder-authorized copying only. Don't steal music.
MEI100 : The MEI100 cannot be connected to the CD3200.
(sold separately)
L SIDE
NO CONNECTION (Do not remove cap)
NO CONNECTION
(Do not remove cap)
TO SIGNAL INPUT OF AUXLIARY
POWER AMPLIFIER
1
ANTENNA PLUG
13P 16P
White
Yellow
White/Black
INSULATE EACH WIRE WITH NONE
CONDUCTING TAPE SUCH AS
Gray
ELECTRICAL TAPE OR ANOTHER
INSULATING METHOD
Gray/Black
Green
Red
Green/Black
INSULATE EACH WIRE WITH NONE
Blue
CONDUCTING TAPE SUCH AS
RELAY (Supply) Purple
ELECTRICAL TAPE OR ANOTHER
Orange/White
INSULATING METHOD
Purple/Black
(Illumination (+) )
Blue/White
Brown
(Amplifiers, etc.)
Brown/Black TO STEERING REMOTE CONTROL
Black
TO GROUND
2
or CD3200 + EXTERNAL EQUIPMENT (MP3 PLAYER, MD PLAYER, etc.)
2) CD7200 mk
L SIDE
TO THE RCA OUTPUT CONNECTORS
OF AN EXTERNAL EQUIPMENTS
R SIDE
TO USB DEVICE
AUX105
(sold separately)
TO THE RCA
OUTPUT L SIDE
CONNECTORS OF
AN EXTERNAL
EQUIPMENTS
13P
R SIDE
Red
TO ACC (Power Supply)
Yellow
TO BATTERY+12V (Permanent Supply)
Blue
TO POWER ANTENNA RELAY (Supply)
Orange/White
TO HEAD LIGHT SWITCH (Illumination (+) )
Blue/White
TO TURN-ON WIRE (Amplifiers, etc.)
Black
TO GROUND
2
3) CD7200 mk or CD3200 + HDR105 + CH3083 + Power Amplifer
TO BATTERY+12V
(Permanent Supply)
TO GROUND
ANTENNA PLUG
2P
HDR105
ANTENNA EXTENSION WIRE
(sold separately)
TO USB DEVICE
13P
13P
TO BATTERY+12V
NO CONNECTION
(Permanent Supply)
(Do not remove cap)
13P
CH3083
2P
(sold separately)
TO GROUND
TO ACC (Power Supply)
INTERCONNECTING WIRES
TO POWER ANTENNA RELAY (Supply)
(supplied with CH3083)
TO HEAD LIGHT SWITCH (Illumination (+) )
TO TURN-ON WIRE (Amplifiers, etc.)
NO CONNECTION (Do not remove cap)
NO CONNECTION (Do not remove cap)
NO CONNECTION (Do not remove cap)
1
ANTENNA PLUG
16P
White
White/Black
FRONT
Gray
SPEAKERS
Gray/Black
Green
Green/Black
REAR
Purple
SPEAKERS
Purple/Black
Brown
TO STEERING REMOTE CONTROL
Brown/Black
NO CONNECTION
NO CONNECTION (Do not remove cap)
(Do not remove cap)
TO SIGNAL INPUT OF AUXLIARY
POWER AMPLIFIER
1
16P
13P
White
Yellow
White/Black
INSULATE EACH WIRE WITH NONE
CONDUCTING TAPE SUCH AS
Gray ELECTRICAL TAPE OR ANOTHER
INSULATING METHOD
Gray/Black
Green
Red
Green/Black
INSULATE EACH WIRE WITH NONE
CONDUCTING TAPE SUCH AS
Blue
Purple ELECTRICAL TAPE OR ANOTHER
INSULATING METHOD
Orange/White
Purple/Black
Blue/White
Brown
TO STEERING REMOTE CONTROL
Brown/Black
Black
TO GROUND
2