Epson Stylus COLOR 1160 Service Manual page 91

EPSON Stylus COLOR 860/1160
n
Since the spring is included among the gears in the pump
assembly, make sure that the parts do not pop out during
disassembly and assembly.
n
When assembling the Cap Assembly to the Ink System
Assembly, make sure that the Ink absorption Pad has been
set in the Cap Assembly. Refer to Figure 4-15.
n
When assembling the printer, be careful not to crush or leave
any stress on the ink tube connecting the pump assembly
and the cap assembly.
n
Check that the ink tube is connected securely to the connect
portion of the Cap Assembly. Refer to the Figure 4-16.
n
Check that the ink tube is placed correctly in the Ink System
Assembly. Refer to Figure 4-16.
n
After installing the Pump Assembly, ensure that the cleaner
parts move back and forth by rotating the Gear.
n
After setting the three protrusions of Cap Assembly to the
suitable fixing holes of the metal plate, secure the Ink
System Assembly to the Middle Frame with the screws.
See Figure 4-14.
Disassembly and Assembly
About 60-90
Figure 4-15. Setting the Ink Absorption Pad
Cap Assembly
Pump Assembly
Figure 4-16. Placing the Ink Tube in the Ink System
Disassembly Procedures
Ink Absorption Pad
About 45
Ink Tube
Revision C
91