Epson Stylus COLOR 1160 Service Manual page 111

EPSON Stylus COLOR 860/1160
9) Remove three screws (No.1) securing the Front Frame to the Printer
Mechanism and remove it. Refer to Figure 4-59.
10) Remove three screws (No.1) securing the Paper Eject Frame Assembly
and remove it. Refer to Figure 4-59.
No. 1 Screw fixing the Paper
Eject Frame Assembly
No. 1 Screw fixing
the Front Frame
Figure 4-59. Removing the Font Frame & Paper Eject Frame
11) Remove the PF Earth Spring between the left edge of the PF Roller and
the Bottom Frame.
12) Remove the Paper Guide Front by releasing the hooks (SC860: two hooks,
SC1160: four hooks) from the Paper Eject Roller Shaft. Refer to Figure
4-60.
13) Remove the Earth Spring from the left edge of the Paper Eject Roller
Assembly.
14) Remove the Paper Eject Roller Assembly, releasing the fixing locks
located on the right and Left edges of the Paper Eject Roller Shaft. Refer to
Figure 4-61.
Disassembly and Assembly
Hooks fixing the
Paper Guide Front to
the Paper Eject Roller
Figure 4-60. Removing the Paper Guide Front
Hooks fixing the
Paper Eject Roller
Figure 4-61. Removing the Paper Eject Roller Assembly
Disassembly Procedures
Paper Guide Front
For
SC1160
For
SC1160
Paper Eject Roller
Revision C
111