Changing The Bobbin - Duerkopp Adler 506-3 Operating Instructions Manual

2.4 Changing the Bobbin

3 2
14
1
Remove the bobbin
–
Press button 2 on the sewing head or button "
unit.
–
Hold on to cover 1 and push the locking lever 3 upwards to unbolt
the cover.
–
Fold cover 1 forward and down.
ATTENTION !
Cover 1 is monitored by a safety switch.
With the cover open, all functions of the controls are blocked.
Starting the sewing sequence after a change of bobbin is only possible
with the cover closed.
–
To swing the bobbin case 4 out press the ejector lever 5 to the left.
–
Remove the bobbin from the bobbin case 4.
5
4
" on the control