Specifications; Hardware Specifications - Epson LQ-570 Service Manual

REV.-A
This section provides specifications for the LQ-570+ printer.

1.2.1 Hardware Specifications

Printing method
Pin mnfiguration
Feeding methods
Line spacing
Paper insertion
Paper-feed speed
NOTE: The points below provide precautions for paper handling.
1. Friction feed(release lever in FRICTION POSITION).
. Paper must be loaded from the front or top entrance.
(top entrance), or bottom 40.2mm(l .6in.)cfront entrance) area.
Serial, impact, dot matrix
24 wires (12x 2 staggered, diameter 0.2 mm)
Friction feed (front/top)
Push tractor feed (rear)
Pull tractor feed (fronthttom)
Push-pull tractor feed (with optional tractor) (rear)
1/6 inch, 1/8, or programmable in units of 1/360 inch
Friction feed -- Front or rear side
Front, bottom, or rear side
Tractor feed --
Friction without CSF -2.0 msec/O.141mm(continuous)
Friition with CSF --
66.7rns/4.23mm(mntinuous 2.51PS)
73.1 ms/4.23mm(intewal 2.51PS)
2. Oms/O.141 mm(continuous normal mode)
Tractor --
Wires 2
1
I
I
I
1-3