REV.-A
the Circuit Boards
3.2.1 Removing
the
FRAME ASSY.,SHEET GUIDE.
Remove
2.
the
Remove
COVER ASSY.,EJECT.
Figure 3-2. Removing the FRAME ASSY., ;HEET GUIDE and the COVER ASSY., EJECT
3.
Release the two levers that hold the printhead to the oarriage, and remove the printhead.
4.
Remove the two FFCS (CABLE, HEAD, FRONT(,REAR)) from the printhead.
Figure 3-3. Remove the Printhead
3-5
COVERASSY.,EJECT