Table 1-1. Interface Options; Features - Epson LQ-570 Service Manual

Hide thumbs Also See for LQ-570:

User manual (153 pages)

Setup manual (14 pages)

Manual (12 pages)

Table Of Contents

Table of Contents

REV.-A

1.1 FEATURES

The LQ-570+ is a small, light-weight, low-cost, printer with advanced paper handling that is upper corrmatible with

the

Use of ESC/P 2 control codes

Ability to print multi-point fonts

Ability to receive and print raster graphic images

Compatibility with the LCVSQ series available on the market

Printing speeds: 225 characters per second (cps) (draft, 10 characters per inch (cpi))

High speed drafl has not equiped

269 cps (draft, 12 cpi)

225 cps (draft, 10 cpi)

90 cps (LQ, 12 cpi)

75 cps (LQ, 10 cpi)

Optional interface card

Clear, easy-to-read printing with standard EPSON fonts

Multiple fonts resident in the printer

9 LQ fonts (Roman, Saris Serif, Courier, Prestige, Script, OCR-B, Script C, Orator, Orator-S)

1 draft font

Control panel switch selection of fonts, mndensed, and cut-sheet feeder (CSF) bin

Optional tractor unit that can make up push-pull tractor

Easy handling of cut sheets with the optional cut-sheet feeder

Continuous Paper

Three ways to 'insert continuous paper (front/bottom/rear path)

Auto backout & auto loading (rear insertion)

Continuous paper can be used without removing CSF

Standard tractor unit can be attached in two position (pusWpull)

Cut Sheet

Two ways to insert cut sheets (front/top)

Auto loading

The LQ-570+ is equipped with the standard EPSON 8-bit parallel interface( Printing is not possible for the following

baud rates: 1800, 200, 134.5, 110, 75 bps). Various interface options ensure mmpatibility with a wide variety of

computers. Table 1-1 lists the interface options, Table 1-2 lists the optional units available for the LQ-570+, and

Figure 1-1 shows an exterior view of the LQ-570+.

Model

C8231O

C82311

NOTES : Refer to the "Optional Interface Technical Manual" for details.