HP 1200 series Basic Manual page 17

If you are working with originals that are printed on 16-24 lb. (60-90 gsm) plain paper or

HP Premium Inkjet paper, you can load more than one in the automatic document feeder

(ADF). If you are working with photos or originals of an odd size (no smaller than 3-by-

3 inches or 76-by-76 millimeters), load them in the ADF one at a time. When working with

fragile, torn, or odd-sized originals, we recommend that you use a document sleeve or

sheet protector (available from most office-product stores) for the original. Place a

single sleeve into the ADF with the sealed edge first and the transparent side down.

Place the original(s) in the ADF with the printed side facing toward the back and

with the top of the document pointing down.

Adjust the document guides to fit your document.

To avoid paper jams, remove papers from the output tray frequently. Output tray

capacity is affected by the type of paper and the amount of ink you are using. For more

information about output-tray capacity, see "Technical information." For help with

clearing a paper jam, see "Troubleshoot your unit."

Chapter 3—Load paper or transparency film, or load originals

HP Fax 1200 Series

Fax 1200 series