Installing The Sewing Unit; Transport Safety Devices - DURKOPP ADLER 806 Installation Instructions Manual

2.

Installing the sewing unit

2.1

Transport safety devices

4
1
2
3
CAUTION
The sewing unit may only be installed by skilled personnel.
The following units are secured by means of transport safety devices:
–
Sewing head
–
Stacker
–
Transfer carriage
–
Folding device
Removing the transport safety devices
–
Remove the covers above the table according to section 3.1.
–
Loosen the screws 2 of the transport safety device on the sewing
head.
–
Remove the transport safety device 3.
–
Remove the holding straps on the stacker.
–
Tilt the stacker forward.
–
Remove the holding straps on the transfer carriage.
–
Remove the holding straps on the cylinder 1 of the folding device.
–
Remove the wooden block on the cylinder 1.
–
Mount the covers above the table according to section 3.3.